I.e. set a profile to be used automatically when a new device is detected.
Thanks.
EDIT: Clarification: How may I configure a fresh portable installation such that it will use my preconfigured chosen device profile for any subsequently detected MTP device? Options, Portable Device Sync shows:
Setting the profile of "Windows Media compatible device d_WMDM.dll" fails - see:
Settings for "Windows Media compatible device d_WMDM.dll" lost on device detection
https://www.mediamonkey.com/forum/viewt ... p?t=103194
How may I set the default device profile? [#19697]
Moderator: Gurus
Re: How may I set the default device profile?
Hi,
Not sure I follow. Profile is still created as soon as you connect device, but some older devices announce itself as MSC external HDD and not as Removable device which makes MM auto disable because some users have external HDDs with media for MM library and not to be used as Sync device.
Not sure I follow. Profile is still created as soon as you connect device, but some older devices announce itself as MSC external HDD and not as Removable device which makes MM auto disable because some users have external HDDs with media for MM library and not to be used as Sync device.
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
Re: How may I set the default device profile?
Does anyone have an answer to this? Thanks.chrisjj wrote: ↑Sat Dec 17, 2022 7:41 pmHow may I configure a fresh portable installation such that it will use my preconfigured chosen device profile for any subsequently detected MTP device? Options, Portable Device Sync shows:
Setting the profile of "Windows Media compatible device d_WMDM.dll" fails - see:
Settings for "Windows Media compatible device d_WMDM.dll" lost on device detection
https://www.mediamonkey.com/forum/viewt ... p?t=103194
Chris
Re: How may I set the default device profile?
Hi,
Not possible to make persistent default settings, Best way would be to create/setup profile and export its settings that you can load on each new device detected.
Not possible to make persistent default settings, Best way would be to create/setup profile and export its settings that you can load on each new device detected.
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
Re: How may I set the default device profile?
Thanks.
That's more or less what I do currently, but am looking to cut out the manual load step to help non-technical users. Thanks.
Chris
Re: How may I set the default device profile?
Hi,
The more I think about it the more I see the need for that so added as I pictured the scene https://www.ventismedia.com/mantis/view.php?id=19697
Ouch, it would not be the first time that I create Steps in pics with shiny arrows to explain. Good luck.
The more I think about it the more I see the need for that so added as I pictured the scene https://www.ventismedia.com/mantis/view.php?id=19697
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts